K&N Air Filter Cleaner is the only cleaner formulated to clean K&N Filtercharger® air filters with cotton media. The use of any other cleaning solution can void the filter's warranty, and quite possibly could damage the cotton material. K&N Power Kleen Cleaner works to dissolve the dirt build-up and old filter oil, and can be washed away with water. It so good at cleaning greasy dirt and grime that it is also used as an industrial strength degreaser.
The motogadget chronoclassic is a digital multi-purpose instrument in a classic round casing.
Technically identical to the motoscope classic, it brandishes a black dial and a white indicator. The design resembles old Smiths brand instruments.
Another distinct characteristic is the dark LC display of the DarkEdition. It further increases the harmonic look of the gauge.
Please note: We explicitly stress that readability decreases in cases of direct sunlight. If readability is of primary concern to you, please purchase the standard green display.
A technically identical instrument is also available with an analogue speedometer (please refer to the CLASSIC series).
Instrument with approx. 55 cm connector cable, complete wiring, fuse, speedometer sensor M5 x 0,5 fine-pitch thread with 150 cm connector cable, 2x magnet, mini push-button, 3x M4 screw (VA), detailed installation and operating instructions. Please note that temperature and pressure sensors have to be ordered separately (refer to "Accessories").
m-Blaze Disc by motogadget – a turn signal for handlebar end installation in a trend-setting design
The m-Blaze Disc is the latest generation of turn signal lights.
The characteristic feature of the LED turn signal is the transparent light-emitting disc on a compact aluminium base providing the harmonious finish of the handlebar end.
This is already the third generation of our turn signals using the motogadget TranzLight-Technology® (TLT, patent pending). This progressive approach to development is not limited to the miniaturization of turn signal casings. Furthermore, it creates new lighting concepts directly through a crystal-like plastic body. Only the precision of CAD calculations and state-of-the-art manufacturing processes allow this new design and its performance opportunities.
The luminous flux required for the TranzLight technology is generated by the intensiLED® procedure developed by motogadget. It consists of three important pillars:
- specifically selected, high output LED with maximum efficiency and 7W total output and a service life of more than 50,000 hours
- IC controlled constant power source with 330 kHz pulses
- special collimator optics, that precisely bundles the emission light from the LED into the plastic body
The subtle aluminium casing is used for the secure mount of the plastic body only and includes the electronic control system and high-end LEDs.
Traditionally, the casing is machined using CNC technology, available with an anodized black or mirror polish surface and furnished with an elegant finish of laser inscriptions.
The turn signal for handlebar end installation has a very low construction height and, due to the transparent disc, the m-Blaze shows up with a very neutral and subtle look. That's why the m-Blaze is the perfect match to many styles and all types of motorbikes.
The m-Blaze Disc has E mark and front turn signal approval.
Parts delivered: Single turn signal "m-Blaze Disc", left or right side; for handlebar end installation; incl. clamping for steel and aluminium handlebars (22 mm and 1 in.) with 14 mm to 21 mm I.D.; connector cable length approx. 100 cm.
Always make sure to order a complete set consisting of the left and right side turn signal assembly!
This is the Billet Internal Adapter for the Arrow, Hindsight, Hindsight LS and Blindsight Billet Bar End Mirrors. CRG makes this assembly to offer an alternative to the basic Bar End Mirror mount. This assembly will work on bars with internal diameters as small as 12mm (.475”) and as large as 19mm (.750”). This range covers virtually all aluminum and steel bars/clip-ons.
Whenever possible, CRG recommends mounting the Hindsight Billet Bar End Mirror with the basic mount which clamps to the outer diameter of a 7/8” handlebar/clip-on. Using the basic mount is the bar end mirror solution using the fewest parts, facilitates the easiest installation and removal, is the lightest weight, and provides for the most secure bar end mirror mounting. Use of the basic mount requires having 10mm (3/8”) of bare bar outboard of the grip/throttle assembly. Before purchasing the mirror adapter, try moving your grips and controls inboard (away from the end of the bar). In many applications, the mirror can be mounted with the basic mount.
THE MICRO-START---- WHAT IS IT AND WHAT CAN IT DO?
The Micro-Start XP-1 model comes with everything you need to in a convenient carrying case: SEE IMAGE BELOW
Extensive material research and design testing, plus expert and carefully detailed craftsmanship, have produced the ultimate standard in grip comfort and beauty. Anti-vibration large pad design eliminates numbness and slipping for any hand size. Made in the U.S.A.
5 inches long (127 mm)
4.5 inch circumference
7/8" I.D. left hand grip
1" I.D. throttle hand grip
1.26 inches O.D. (32 mm)
5 ounces (141.5 grams)